KORDZ HDBASET 4K HDMI, IR & RS232 OVER CAT6 EXTENDER

Engineered to deliver 4K HDMI IR, RS-232 over a single CAT6 cable. Tested and certified for long length AV connectivity up to 40m 4K60UHD/ 70m 1080p. Transmitter (TX) and receiver (RX) are powered by a single DC power supply at the transmitter end.
Code:	PLX-HDB.2
Brand:	KORDZ

Features:

Each chassis is only 16mm high with all connections positioned on one side, allowing installation flexibility in tight spaces
Mounting brackets are included
Supports CATx UTP/FTP/STP cable
4K UHD to 40m
1080/60 to 70m
Supports HDMI 1.4 UHD60 8-bit 4:2:0
Supports HDMI 1.4 UHD30 up to 12-bit 4:2:2, & 8-bit 4:4:4/sRGB
HDCP 2.2 compatible
HDBaseT certified
HDBaseT Lite VS010 architecture
IR & RS232 Control

Extension Technology: VS010 HDBaseT Lite
Link Cable Length: <40m UHD24-60fps*, <70m 1080p/60
*UHD 60 fps supported with 8-bit 4:2:0 mode only (HDMI 2.0)
Video Support: VESA and SMPTE 480p to 2160p (4K), 1080p/60 3D
Audio Support: All HDMI audio formats, Dolby HD/Atmos® + DTS® HD-Master Audio/DTS:X + PCM
Channel Count: 2.0 to 7.1 (HDMI 1.4), 10.2-30.2 3D Audio (HDMI 2.0)
Sample Rates: 32kHz, 44.1kHz, 48kHz, 88kHz, 96kHZ, 176.4kHz, 192kHz all channels, 1536kHz 2ch
Thermal Performance: Chassis TX 27°C | RX 35°C free air, room temp 20°C

HDMI: Type A, < 340MHz TMDS Clock
IR Downstream:
IN (on TX): 3.5mm 2-pole [SIG tip | Gnd sleeve]
OUT (on RX): 3.5mm 2-pole, 940nm emitter direct connection
IR Upstream:
IN (on RX): 3.5mm IR target direct [SIG tip | Gnd ring | 12V sleeve]
OUT (on TX): 3.5mm 2-pole, 940nm emitter direct connection
RS-232: Simple transmit/receive protocol
HDBaseT Link: 8P8C (RJ45) shielded, supports up to 10.2Gbps aggregate data rate
DC Power: 24V DC 1.25A (30W), locking connector
Power over HDBaseT (PoH): YES, 25.5W IEEE-802.3at compliant
Chassis Construction: Aluminium, powered coated
Dimension: 103 x 84 x 16mm
Weight: TX 134g | RX 131g
Included accessories: PSU - international adapters, mounting brackets x2 pairs, adhesive rubber feet
Optional accessories:
- 3.5mm-DB9 RS-232 male cable (PLX-RS232M)
- 3.5mm-DB9 RS-232 femail cable (PLX-RS232F)
- IR target (IR-TB2), IR emitter (IR-EM1)

*Note - IR and RS-232 cables are available separately.