JL C1 SERIES 6.5" 50W RMS COAXIAL SPEAKERS

Description:

• C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
• To facilitate fit, multi-application adaptor rings are included with the C1-650x allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the speaker will fit into many "6-inch" speaker locations as well.
• C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-650x is a proprietary, stamped, steel 6.50-inch (165 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
• Equipped with a true, edge-driven, aluminum dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeters design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling. When it comes to value, C1 is the real deal! Sold as a pair. Grilles not available.

Specifications:

General

• Continuous Power Handling (RMS): 50W
• Sensitivity: (SPL @ 1W/1M): 90.5 dB
• Frequency Response: (+/-3 DB): 48 Hz - 24 KHz
• Nominal Impedance: 4Ohm
• Recommended Amplifier Power (RMS): 10-75 W/Channel
• Voice Coil Diameter: 1" (25 mm)
• Cone Material: Mineral-filled polypropylene
• Tweeter Type: Aluminium Dome
• Tweeter Size: 0.75" (19 mm)
• Speaker Connections: Spade

Mounting Dimensions

• Frame Outer Diameter: 6.25" (159 mm)
• Mounting Depth Clearance: 2.07" (53 mm)
• Mounting Hole: 5.02" (128 mm)
• Motor Outer Diameter: 3.15" (80 mm)
• Frontal coaxial tweeter protrusion (frontal grille protrusion measured from mounting surface): 0.72" (18 mm)

Included:

• Two coaxial speakers
• Eight mounting screws
• 8 speed clips
• Two 0.187" female crimpable connectors
• Two 0.110" female crimpable connectors
• Eight 1/4" thread forming screws
• Two multi-application adapter brackets