Categories
Browse by:
Customer Support
Reseller Task
DNA REVERSE CAMERA + FACTORY-FIT LOOM TO SUIT 2024+ 79 SERIES LANDCRUISER
| DNA heavy duty butterfly camera with direct plug-and-play wiring harness to suit 79 Series Toyota Landcruisers. Direct plug-and-play when using the factory screen supplied in the facelift 79 Series 24+ models. |
|
| Code: | RCLC170 |
| Brand: | DNA |
Pack Features:
- Perfect direct fit solution for adding an aftermarket camera to the 2024+ model 79 Series Toyota Landcruiser
- Connects directly into the in-line harness at the front driver-side kick panel (instructions with images are included)
- No further setup is required; once connected, the factory head unit should receive camera signal when in reverse
- Pack includes:
- RCL170 heavy duty butterfly camera
- 6m wiring loom
- Y-harness adaptor to suit factory wiring
Camera Features:
- This butterfly camera is designed and built tough for 4WD, recreational and trade applications.
- Heavy duty Zinc alloy housing with a waterproof rating of IP68
- Includes selectable options: PAL/NTSC video format, parking guide lines and reverse mirror imaging
- PAL/NTSC format (Purple wire): By default is set to PAL format. (Cut wire to change to NTSC format)
- Image Control (Green wire): By default is set for rear camera installation. (Cut wire to change image for front camera installation)
- Parking Line (White wire): By default is set to show parking lines. (Cut wire to turn off)
Camera Specifications:
- Image Sensor: CMOS
- Video System: PAL or NTSC (Selectable)
- Scanning area: 4.88mm*3.67mm
- Resolution: 976(H)*592(V)
- Horizontal Resolution : 700 TVL
- Electronic Shutter: 1s-1/10000(S)
- SNR: =45.0dB
- Min Illumination: 0.01Lux
- Video Output: 1.0V±0.5Vp-p 75O
- View Angle: 170°
- Working Voltage: DC6V-15V±0.5V
- Consumption: 100mA±10%
- Waterproof Rating: IP68
- Camera Body Size: 28mm W x 22mm H x 22mm D
- Butterfly Base Size: 44mm L x 18mm W
PLEASE NOTE -
Some variations of the new 79 Series vehicles are coming in with the old Toyota radio without Carplay. These vehicles may not have the wiring connection in the Drivers kick panel to allow you to use this kit with it. If that is the case, you will need to use our VRTY28 harness with a DNA camera, connecting it directly to the back of the head unit.
