Wholesale Distributors for the Car Audio, Auto Electrical, Home Theatre,
Communication, Commercial AV and Consumer Electronic Markets

Servicing Western Australia Since 1984
For ordering call 08 9240 2233 Monday to Friday from 8:30AM to 4:30PM


Browse by:

Customer Support

Reseller Task


IP 18Gbps Multicast UHD Video Transmitter over 1Gb Network, HDMI Loop-out,
2ch Dante Audio Transmitter/Receiver, Dual RJ45 & SFP Network Ports,
Bi-directional IR, RS-232 & USB/KVM, PoE, Analogue Audio Embedding, Analogue
Audio Breakout and HDCP 2.2
Code: IP350UHD-TX


The Blustream IP500UHD Transceiver is a SDVoE AV over IP solution that provides the highest-quality, un-compromised 18Gbps 4K with zero latency Audio/Video extension over copper or optical fibre 10Gb Managed Networks. It also includes support for HDMI 2.0 including distribution of HDR (High Dynamic Range), 10-bit colour content, and multi-channel HD audio signals. The system provides advanced features including PoE+ and transmission of multiple control and data signals alongside audio and video, including IR, RS-232, USB (KVM) and 1Gb Ethernet. It is an ideal for mission-critical 18Gbps HDMI installations where multiple transceivers can be combined with one or more 10GbE copper / fibre switches to form a distributed video matrix, multi-viewer, or video wall system.

Zero Latency 1Gbps LAN 4K 60Hz 444 KVM Multiview PoE plus Video Scaling


  • Advanced 4K HDMI 2.0 video over 1Gb managed network supporting 18Gbps HDMI signals
  • Virtually unlimited system size
  • Extends HDMI up to a distance of 100m over a single CAT cable
  • SFP port for signal distribution over fibre
  • Features 1 x HDMI loop-out for integrating local displays or cascading to multiple devices
  • Supports up to 4K UHD 60Hz 4:4:4
  • Supports HDR including Dolby Vision LLM
  • Dual RJ45 network ports configurable for independent or combined HDMI and Dante signal distribution
  • SFP port for independent or combined HDMI and Dante signal distribution over a single fibre cable
  • In-built 2ch Dante transmitter for breakout of audio from HDMI source or local analogue audio input
  • In-built 2ch Dante receiver for embedding of audio onto the HDMI signal or breakout to local analogue audio output
  • Supports all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
  • Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video
  • PoE (Power over Ethernet) to power Blustream unit from PoE switch
  • HDCP 2.2 compliant with advanced EDID management
  • Balanced/unbalanced analogue L/R audio embedding
  • Audio breakout to analogue L/R audio, supporting both balanced and unbalanced audio signals
  • OLED front panel display for advanced system information and manual configuration
  • Optional 24V power supply (should Ethernet switch not support PoE)
  • Compatible with Blustream IP300UHD-RX and IP350UHD-TX/RX products
  • IP300/350 Multicast platform features 4 operational modes:
    • Matrix distribution (requires 1Gb network switch)
    • Video wall (requires 1Gb network switch)
    • One-to-one HDMI extender (no network switch required)
    • One-to-many HDMI extender (no network switch required)


  • Video Input: 1 x HDMI Type A, female
  • Video Output: 1 x LAN RJ45 connector (LAN1/PoE), 1 x SFP connector, 1 x HDMI Type A, female
  • Audio Input: 1 x 5-pin Phoenix connector
  • Audio Output: 1 x 5-pin Phoenix connector, 1 x Optical (S/PDIF)
  • Dante Port: 1 x LAN RJ45 connector (LAN2)
  • Fibre Port: 1 x SFP connector (fibre module not supplied)
  • RS-232 Serial Port: 1 x 3-Pin Phoenix connector
  • USB/KVM Port: 1 x USB2.0-type B for KVM
  • IR Input: 1 x 3.5mm stereo jack
  • IR Output: 1 x 3.5mm mono jack
  • Dimensions (W x D x H ): 190mm x 128mm x 25mm
  • Packaging Dimensions (W x D x H): 260mm x 180mm x 55m
  • Unit Weight: 0.75kg
  • Power Consumption: 12W (max)
  • Shipping Weight: 1kg
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature : -4°F to 140°F (-20°C to 60°C)
  • Power Supply: Class 3 IEEE 802.3af POE PD or 24V 1A DC PSU


  • 1 x IP350UHD-TX
  • 1 x IRR Receiver
  • 1 x IRE1 Emitter
  • 2 x Audio 5-pin Phoenix Connector
  • 1 x Serial 3-pin Phoenix Connector
  • 1 x Mounting Kit