BLUSTREAM ANALOGUE AUDIO NETWORKED POWER AMPLIFIER

The NPA20ANA networked power amplifier features a 2 x 10W (1 x 20W mono) audio output at 4 or 8 ohm, with a 2ch balanced / unbalanced analogue audio input. The unit can be powered via PoE or PoE+ from a compatible network switch.
Code:	NPA20ANA
Brand:	BLUSTREAM

AMP PoE plus RS 232 WEB GUI i2D Signal Sensing

Features:

Advanced network audio amplifier with balanced / unbalanced analogue audio input
Supports 2 x 10W @ 4 / 8 ohm, 1 x 20W @ 4 / 8 ohm
Supports power via PoE+ on LAN connection or local power supply*
2ch balanced / unbalanced audio in and out with master / slave amp control feature allowing daisy chain of up to 4x NPA20ANA amplifiers
DSP with 31 band EQ with +3dB/-10dB and audio delay
Local 0V / 5~12V input trigger for automated power control
Control via front panel buttons, RS-232 and IP
Auto standby mode with signal sensing
In-built web-GUI for setup and control

* Amp power limited when using PoE / PoE+

Casing Dimensions (W x H x D): 169mm x 144mm x 22mm
Shipping Weight: 1.2kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature : -4°F to 140°F (-20°C to 60°C)
Power Supply: PoE+ Type 2 Class 4, or 24v/1.25A DC 4-pin DIN (power supply not included)
Audio Inputs: 1 x 5-pin Phoenix connector (balanced/ un-balanced analogue audio)
Audio Output Connectors: 1 x 5-pin Phoenix connector (balanced/un-balanced analogue audio)
Speaker Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker)
RS-232 Serial Port: 1 x 3-Pin Phoenix connector
Trigger Input: 1 x 2-Pin Phoenix connector