BLUSTREAM 4-WAY 4K HDMI 2.0 SWITCHER WITH MULTI-CHANNEL DANTE AUDIO OUT

Description:

• The SW42DA will pass native video with the embedded multi-channel audio to compatible equipment on output 1, with a second HDMI output featuring optional video down-scaling from 4K 60Hz 4:4:4 or 4:2:0, video down to 1080p, with the native embedded audio, or down-mixed 2ch audio as required.
• Audio capabilities include the selection and manipulation of formats across both multichannel and 2ch downmixed. The Dante output allows for 9.1ch breakout and embedding into a Dante digital signal, and/or 7.1ch breakout with a separate 2ch down-mixed Dante output. Optical S/PDIF breakout (2ch or 5.1ch as required), individual analogue multi-channel breakout, and 2ch downmixed balanced/unbalanced analogue audio can also be broken out as required directly from the unit. 
• The SW42DA provides an advanced, but cost effective solution for ensuring that 4K UHD video and multi-channel audio can be distributed around a Dante multi-room system where there are a mixture of 2ch and/or 7.1ch zones or 7.1.2ch / 5.1.4ch (9.1ch) audio, with multiple output resolution requirements. Perfect for cinema and media room set up's where local content would be shared within a multi-zone distributed system where either multichannel or down-mixed audio is required.

Key Features:

• Features 4 x HDMI inputs which can be switched to the dual HDMI outputs simultaneously
• Supports HDMI 2.0b 18Gbps specification, including 4K 60Hz 4:4:4 UHD video
• Supports distribution of the latest HDR resolutions including HDR10/10+ and Dolby Vision
• HDMI output 1 replicates the HDMI input signal - up to 4K 60Hz 4:4:4 and 5.1.4ch / 7.1.2ch Dolby Atmos and DTS-HD multi-channel audio
• HDMI output 2 features an optional 4K video down-scaler, and 5.1.4ch / 7.1.2ch to 2ch Dolby Atmos and DTS-HD audio downmixing 
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio transmission
• HDMI audio breakout of Dolby Atmos and DTS-HD to up to 8 channels of Dante audio (7.1ch), with an independent 2 down-mixed channels of Dante audio
• HDMI audio breakout of Dolby Atmos and DTS-HD to up to 10 channels of Dante audio (7.1.2ch / 5.1.4ch)*
• HDMI audio breakout to 7.1ch balanced / unbalanced analogue audio outputs
• HDMI Dolby Atmos and DTS-HD 7.1 down-mixing to 2ch balanced and unbalanced audio ouputs
• Supports ARC/eARC including breakout to 7.1ch and 2ch downmixed analogue, and Dante audio
• Supports: 44.1, 48, 88.2 & 96kHz Dante® sample rates @ 24-bit
• Configurable Dante® device latency using Dante® Controller
• Supports AES67 RTP audio transport
• Control via TCP/IP, web-GUI, RS-232, front panel buttons, and infrared 
• HDCP 2.3 compliant with advanced EDID management 

* The Dante 2ch down-mix channels can be re-allocated to allow for additional height channels (7.1.2ch / 5.1.4ch)

Specifications:

• Video Input Connectors: 4 x HDMI Type A, 19-pin, female
• Video Output Connectors: 2 x HDMI Type A, 19-pin, female
• Audio Output Connectors: 1 x Optical (Toslink), 5 x 5-pin Phoenix connector (8ch and separate 2ch balanced / unbalanced analogue audio), 1 x RJ45, female (100Mbps Dante® network)
• EDID: 4-pin DIP switch
• TCP/IP Control: 1 x RJ45, female
• RS-232 Port: 1 x 3-pin Phoenix connector
• IR Input Ports: 1 x 3.5mm stereo jack
• Dimensions (W x H x D): 220mm x 214mm x 45mm, without feet or connections
• Shipping Weight: 2.6kg (TBC)
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
• Power Supply: Internal 100-240V AC

Includes:

• 1 x SW42DA
• 1 x Remote Control
• 1 x IR Receiver
• 1 x 19” Rack Mounting Kit
• 4 x Feet
• 1 x Quick Reference Card
• IEC Power Cable(s)