BLUSTREAM 1080P CONTRACTOR SERIES HD VIDEO TRANSMITTER

DESCRIPTION:

• This Contractor Series HD distribution platform allows distribution of AV and control signals over a 100Mbps network.
• The IP50HD-RX is an industry leading 1080p HDMI video scaling receiver that uses H.265 compression technology to deliver HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture.
• The receiver can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple configuration options available the Multicast HD solution is ideal for both commercial and residential installations.

FEATURES:

• Advanced HD video, control and KVM over network infrastructure
• Extends HDMI up to a distance of 100m over a single CAT cable
• Supports unicast transmission over unmanaged networks
• Supports multicast transmission for large managed networks
• Supports up to 1080p 60Hz
• Features 1 x HDMI loop-out for integrating local displays or cascading to multiple devices
• Supports PCM 2.0 channel audio
• Advanced signal management for independent routing of IR, RS-232, USB/KVM and video/audio
• PoE (Power over Ethernet) to power Blustream products from PoE switch
• HDCP 1.4 compliant with advanced EDID management
• Analogue L/R audio embedding and audio breakout
• Local 12V 1A power supply should Ethernet switch not support PoE (not included)
• Features 2 operational modes:
  • Matrix distribution (requires 100Mbps network switch)
  • One-to-one HDMI extender (no network switch required)

SPECIFICATIONS:

• Video input: 1x HDMI Type A, 19-pin, female, locking
• Video output: 1x LAN RJ45 connector, 1x HDMI Type A, 19-pin, female, locking
• Audio input: 1x 3-Pin Phoenix connector
• Audio Output Connectors: 1x 3-Pin Phoenix connector
• Ethernet port: 1x LAN RJ45 connector
• RS-232 serial port: 1x 3-Pin Phoenix connector
• USB/KVM Port: 1x USB-Type B
• IR input: 1x 3.5mm stereo jack
• IR output: 1x 3.5mm mono jack
• Mounting kit included
• Dimensions (W x D x H ): 190mm x 95mm x 25mm
• Dimensions Including Connections (W x D x H ): 190mm x 100mm x 25mm , without feet
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature : -4°F to 140°F (-20°C to 60°C)

INCLUDES:

• 1 x IP50HD-TX
• 1 x IR Receiver
• 1 x IR Emitter
• 1 x Mounting Kit
• 4 x Rubber Feet