Wholesale Distributors for the Car Audio, Auto Electrical, Home Theatre,
Communication, Commercial AV and Consumer Electronic Markets

Servicing Western Australia Since 1984
For ordering call 08 9240 2233 Monday to Friday from 8:30AM to 4:30PM


Browse by:

Customer Support

Reseller Task


Versatile 140W class A/B Bluetooth amplifier designed for quality HiFi audio sound reproduction and equipped with a great range of inputs including phono, stereo RCA, Bluetooth, 3.5mm AUX, digital coax, toslink optical and line level.
Code: ADA140BT


  • 2x 70W per channel @ 4Ω, 2x 45W per channel @ 8Ω
  • Full hifi component sized with remote control for a modern classic and capable home stereo amplifier powerful enough for most floor standing speakers.
  • Quality power supply for better audio with toroidal transformer
  • Shielding for the sensitive preamp audio section.
  • The main PCB uses old-school through-hole componentry with all driver and output transistors heat-sinked.
  • Equipped with six inputs, ample for most home audio setups, ideal for those who want a quality stereo amplifier.
  • Two RCA Stereo Line-level inputs plus a phono RIAA preamplifier input for spinning your classic vinyl records.
  • Bluetooth V4.0 enabled for wireless streaming from your mobile device. Removeable antenna for stable reception.
  • Direct digital inputs: Toslink optical and coaxial for PCM decoding up to 24bit/96KHz DAC high-definition audio.
  • There are two sets of RCA outputs. One is record out line level. The other is post volume for an active subwoofer.
  • Front panel has a convenient 3.5mm stereo input for MP3 players, etc. Headphone jack 6.35mm with speaker mute.
  • Illuminated push buttons for source select and power button. A modern classic design, full sized audio component.
  • Tone controls Bass and Treble with a Direct switch for bypassing. Loudness button for a high/low frequency boost.
  • The rear panel has gold-plated Bare-wire or 4mm speaker connection terminal outputs for 4Ω or 8Ω speakers.
  • All metal cabinet and aluminium front panel with an attractive brushed finish.
  • 1x RCA (L/R) Line output and 1x RCA (L/R) REC output.
  • Quality metal case, brushed anodised aluminium front panel
  • Large non-scratch rubber lined feet


Description 140W Class D Amplifier with Bluetooth, Bass & Treble control
Dimensions 430x365x80mm
Colour Black
Freq. 20Hz - 20kHz
Impedance 4Ω to 8Ω
Input 1x RCA(L/R) PHONO, 2x RCA(L/R) Line in, 1x MP3 (3.5mm), Bluetooth, 1x Optical, 1x Coaxial
Manufacturer Accento Dynamica
Noise 93dB
Output Speaker Wire Bare-end or 4mm, 1x RCA(L/R) REC, 1x RCA(L/R) Line, 1x 6.35mm Headphone
Power 2x 70Wrms (4Ω)
Power (RMS) 70W
Price Type Single
Type 140-BT
Watt 2x70Wrms 4Ω
Bluetooth Yes