DNA CMOS BUTTERFLY MOUNT REVERSE CAMERA WITH HARNESS KIT - TO SUIT HILUX

Features:

• Updated Design - As of December 2022 this kit now includes a 4 pin adaptor harness for use with Toyota Hilux vehicles dated 2005 to early 2020
• Suits:  Toyota Hilux June 2020 Onwards
  • Use main harness and connect to the camera extension cable
  • Plugs into the passenger side footwell
• Suits: Toyota Hilux June 2014-2020 Early (Jan-May 2020)
  • Use main harness with 4 pin adaptor harness and connect to the camera extension cable
  • Plugs into the passenger side footwell
• Toyota Hilux June 2005-2013
  • Use 4 pin adaptor harness and connect to the camera extension cable
  • Plugs into the back of the OEM Toyota head unit that has the 4 pin camera input socket

• This simple plug and play kit eliminates the need to cut or solder any wires - It saves pulling apart the dash and trying to access the rear of the head unit area, whereas this harness simply plugs and plays into the harness location in the passenger footwell kick panel area.
• It allows easy installation and integration of a reverse camera to the OEM factory Toyota Hilux screen.
• The camera is then simply mounted in the factory location or under the tray.
• Refer to included instruction manual for installation instructions of your year range Toyota Hilux vehicle.

• Camera strengths:
  • Heavy duty, robust design
  • Zinc Alloy housing 
  • PAL / NTSC Selectable* (by default set to PAL - to select NTSC cut the wire)
  • Parking guidelines are selectable* (White wire - by default is set to show parking lines - cut wire to turn off)
  • Mirror imaging are selectable* (Green wire - by default is set for rear camera installation - cut wire to change image for front camera installation)
  • Butterfly mount 
  • Waterproof IP68 rating
  • Ideal for 4WD and or trade vehicles that get knocked about where a tough camera is needed
  • Plug and play DIY installation with harness

Specifications:

• Image Sensor: CMOS
• Video System: PAL or NTSC (Selectable)
• Scanning area: 4.88mm*3.67mm
• Resolution: 976(H)*592(V)
• Horizontal Resolution : 700 TVL
• Electronic Shutter: 1s-1/10000(S)
• SNR: =45.0dB
• Min Illumination: 0.01Lux
• Video Output: 1.0V±0.5Vp-p 75O
• View Angle: 170°
• Working Voltage: DC9V-15V±0.5V
• Consumption: 100mA±10%
• Waterproof Rating: IP68
• Camera Body Size: 28mm W x 22mm H x 22mm D
• Butterfly Base Size: 44mm L x 18mm W
• Packaging: DNA Gift box with sleeve

**Also available is just the video retention harness only: VRTY20